Maintenance Jobs in Alaska

Job Title: General Maintenance Technician-Tanks-Level 100 Company: CH2M Hill Location: Prudhoe Bay, AK Description: Position Summary:The General Maintenance Technician performs duties associated with Tank & Vessels clean outs & repairs.Essential Job Functions:• Work in confined space under supplied breathing air. • Perform piping spool/valve installation and removal, rigging, blinding and minor pipe fitting• Perform manual labor including operating small hand tools and power tools (buffer/grinders, saw-zalls, drills, shovels, etc.), and carrying and lifting materials (cribbing, shoveling snow, and other activities)• Perform heavy labor such as manual sludge removal to include holding Supersucker hoses in a confined space. • Assist building scaffold with qualified scaffold builder.• Performs manual labor activities, such as cleanup, hauling, stacking materials, shoveling, stacking pipe skids, moving supports, handling steel material and valves • Promote safe work practices and adhere to company and client safety policies and procedures for work performed, including proper hazard recognition and mitigation of task• Demonstrate adherence to established safety policies and procedures and accept accountability for safe work practices• Demonstrate support for the company’s environmental management systemKnowledge, Skills, Ability: • Ability to work in confined spaces• Knowledge of structural and mechanical piping maintenance operations• Knowledge of piping, valve installation and specifications• Ability to build scaffolds to OSHA guidelines • Working knowledge of rigging and bolt-up procedures• Ability to work with minimal supervision and be capable of performing assigned tasks with limited general technical guidance• Ability to hold pressurized firewater hoses for cleaning purposes.• Ability to maintain and disassemble petroleum equipment Qualifications:• Two (2) years experience in cleaning Petrochemicals Tanks & Vessels preferred• Two (2) years experience in a mechanical bolt up preferred• One (1) Year experience building scaffold preferred• Petrochemical, oilfield or arctic experience preferred Physical Demand/Work Environment:While performing the duties of this job, the employee may be exposed to extreme weather conditions. Employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places, extreme heat and high noise levels. Employee will work in an environment where there is risk that they will be exposed to toxic, caustic and/or hazardous chemicals, fumes or airborne particles. Workers are required to wear personal protective equipment while on the job. The work generally requires routine walking, standing, squatting, climbing, stooping, bending, twisting, reaching and carrying items. An individual will be required to work the majority of hours in an industrial environment and will need to be able to quickly respond to a change in work demands. Must be able to routinely lift up to 40 lb. [Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions].Basic Qualifications• Valid driver’s license including ability to be insured by CH2M Hill’s auto insurer required. (*New applicants must provide an acceptable three year DMV record at the time of offer).CountryUnited StatesUSAStateAKUS CityPrudhoe BayEmployment TypeFull TimeDegree RequiredHigh School or GEDCertification RequiredN/ATravel PercentageNoneJob CategoryCraft - SkilledRequisition #32097BRCompanyCH2M HILL Energy & ChemicalsWhat you will findJoin CH2M HILL and discover why we have been named by FORTUNE magazine as one of the 100 Best Companies to Work For in 2008, 2006, and 2003. You will find an employee-owned organization built on tradition, driven by values, dedicated to a diverse workforce, and committed to a positive work/life balance – as each day we focus on Developing People through Challenging Projects.

Job Title: Aircraft Electrician Company: Location: Fort Richardson, AK Description: Functionally tests, troubleshoots, inspects, adjusts, aligns, calibrates and repairs the entire range of aircraft electrical systems. Repairs complex power control and warning systems. Fabricates, repairs and replaces wiring harness, cannon plugs and connectors, electric motors and modifications. Selects, operates, maintains and repairs specialized test equipment, measuring equipment and common shop equipment. Calibrates and adjusts amplifiers, control boxes, and other equipment. Maintains a working knowledge of electrical and mechanical principles as applies to avionics systems. Selects, studies, utilize and update technical manuals, TWXs, newsletter, MWOs and files in support of functional area of responsibility. Assists with identification and requisition of tools, parts, equipment and bench stock required. Performs such travel as may be required in the accomplishment of assigned duties. Performs on-the-job training as required. Evaluates training effectiveness. Performs other duties as assigned.

Job Title: General Maintenance Technician-CMC Crew Company: CH2M Hill Location: Prudhoe Bay, AK Description: Position Summary:The General Maintenance Technician performs duties required in support of Campaign Maintenance Operations. Essential Job Functions:• Perform piping spool/valve installation and removal, rigging, blinding and minor pipe fitting• Perform manual labor including operating small hand tools and power tools (buffer/grinders, saw-zalls, electric/air drills, shovels, etc.), and carrying and lifting materials (cribbing, shoveling snow, and other activities• Assist building scaffold with qualified scaffold builder.• Performs manual labor supporting scaffolding activity, such as cleanup, hauling, stacking materials, shoveling, stacking pipe skids, moving supports, handling steel material and valves • Promote safe work practices and adhere to company and client safety policies and procedures for work performed, including proper hazard recognition and mitigation of task• Demonstrate adherence to established safety policies and procedures and accept accountability for safe work practices• Routinely perform safety and productivity observations; shop, field, and vehicle inspections• Demonstrate support for the company’s environmental management systemKnowledge, Skills, Ability: • Knowledge of structural and mechanical piping maintenance operations• Knowledge of various skilled and/or unskilled tasks as required for a piping maintenance operations• Working knowledge of rigging and piping bolt-up techniques• Knowledge of and ability in blinding and pipefitting techniques• Knowledge of piping, valve installation and specifications• Ability to perform piping spool installation and removal• Ability to work with minimal supervision and be capable of performing assigned tasks with limited general technical guidance• Ability to read mechanical blueprints• Ability to maintain and disassemble petroleum equipment • Ability to erect scaffolds • Ability to maintain and disassemble petroleum equipment• Ability to remove pipeline insulation removal• Ability to follow all policies and procedures and work in a safe and productive manner.Qualifications:• Two (2) years experience in a mechanical piping, rigging and general piping bolt-up and good labor skills perferred• Petrochemical, oilfield or arctic experience preferred Physical Demand/Work Environment:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.MOBILITY: Employee frequently required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit. Must be physically able to access all mechanical, electrical, and utility systems.FINE MOTOR SKILLS: Frequently required to use hands and fingers with sufficient dexterity to perform close, exacting and repetitive tasks. HEARING: Must be able to hear audible safety alarms and warnings.VISUAL ACUITY: Specific vision abilities required by this job include close vision. Vision must be adequate to perform above listed tasks in a safe manner. To distinguish color-coded wiring; to read blueprints, shop drawings and schematics. LIFTING: The employee must regularly lift, pull and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds. COMMUNICATION SKILLS: Must display ability to read and understand job descriptions, safety/technical manuals and safety/warning signs. Must display sufficient oral communication skills to be able to give and receive oral safety warnings, instructions, and task assignments.ENVIRONMENT: While performing the duties of this job, the employee is frequently exposed to severe arctic weather conditions. The employee is occasionally exposed to high, precarious places, confined spaces, and the risk of electrical shock. May be required to work with toxic or caustic chemicals.DISCLAIMER: The above description covers the principal duties and responsibilities of the job, specific to, and intended for, CH2M Hill Greater Prudhoe Bay projects only and may or may not reflect general duties and responsibilities on other CH2M Hill projects. This description should not be construed as a complete listing of all duties that may be required.Basic Qualifications• Valid driver’s license including ability to be insured by CH2M Hill’s auto insurer required. (*All applicants must provide an acceptable five year DMV record at the time of hire).CountryUnited StatesStateAKUS CityPrudhoe BayEmployment TypeFull TimeDegree RequiredHigh School or GEDCertification RequiredN/ATravel PercentageNoneJob CategoryCraft - SkilledRequisition #32664BRCompanyCH2M HILL Energy & ChemicalsWhat you will findJoin CH2M HILL and discover why we have been named by FORTUNE magazine as one of the 100 Best Companies to Work For in 2008, 2006, and 2003. You will find an employee-owned organization built on tradition, driven by values, dedicated to a diverse workforce, and committed to a positive work/life balance – as each day we focus on Developing People through Challenging Projects.

Job Title: General Maintenance Technician-Flex Scaffold Company: CH2M Hill Location: Prudhoe Bay, AK Description: Position Summary:The General Maintenance Technician performs duties including various manual, un-skilled, and/or skilled tasks as required for mechanical piping, structural installation, pipe lifting, scaffold erection, sheet metal fabrication, pipe line insulation, rigging, in accordance with all BP and CH2M safety, environmental and operational practices, policies and proceduresEssential Job Functions:• Perform piping spool/valve installation and removal, rigging, blinding and minor pipe fitting• Perform manual labor including operating small hand tools and power tools (buffer/grinders, saw-zalls, drills, shovels, etc.), and carrying and lifting materials (cribbing, shoveling snow, and other activities)• Assist building scaffold with qualified scaffold builder.• Performs manual labor supporting scaffolding activity, such as cleanup, hauling, stacking materials, shoveling, stacking pipe skids, moving supports, handling steel material and valves • Demonstrate and promote safe work practices and adhere to company and client safety policies and procedures for work performed, including proper hazard recognition and mitigation of task and accept accountability for safe work practices• Demonstrate support for the company’s environmental management system• Ability to work as a part of a team and follow work direction• Participate in JSA, pre-job walk-down and safety SETA card preparation of work and material needed• Routinely perform safety and productivity observations; shop, field, and vehicle inspections• Ability to operate vehicles (Pickups, 12 foot flatbed trucks - F-550, 12 foot box van trucks – F-550) and equipment (i.e. Man lifts) in all season adverse weather or road conditions• Able to work in confined spaces and wear respiratorsKnowledge, Skills, Ability: • Knowledge of structural and mechanical piping maintenance operations• Working knowledge of rigging and bolt-up procedures• Ability to perform piping spool installation and removal• Ability to work with minimal supervision and be capable of performing assigned tasks with limited general technical guidance • General mathematical knowledge• Depending on assignment, may be required to prepare and process various types of documentation including permits and SETA card completion to identify task hazards • Ability to read mechanical blueprints• Ability to follow all policies and procedures and work in a safe and productive manner.• Ability to communicate clear direction to work crews• Ability to work as part of a team; communicate effectively with fellow workers and alternate• Ability to demonstrate commitment to established safety policies and proceduresQualifications:• One (1) year experience installing structural iron preferred • Petrochemical, oilfield or arctic experience preferred • Sheet metal, insulating, scaffold experience is preferredPhysical Demand/Work Environment:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.MOBILITY: Employee frequently required standing; walking; reaching with hands and arms; climb or balance; and stoop, kneel, crouch or crawl. The employee is occasionally required to sit. Must be physically able to access all mechanical, electrical, and utility systems.FINE MOTOR SKILLS: Frequently required to use hands and fingers with sufficient dexterity to perform close, exacting and repetitive tasks. HEARING: Must be able to hear audible safety alarms and warnings.VISUAL ACUITY: Specific vision abilities required by this job include close vision. Vision must be adequate to perform above listed tasks in a safe manner. To distinguish color-coded wiring; to read blueprints, shop drawings and schematics. LIFTING: The employee must regularly lift, pull and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds. COMMUNICATION SKILLS: Must display ability to read and understand job descriptions, safety/technical manuals and safety/warning signs. Must display sufficient oral communication skills to be able to give and receive oral safety warnings, instructions, and task assignments.ENVIRONMENT: While performing the duties of this job, the employee is frequently exposed to severe arctic weather conditions. The employee is occasionally exposed to high, precarious places, confined spaces, and the risk of electrical shock. May be required to work with toxic or caustic chemicals.DISCLAIMER: The above description covers the principal duties and responsibilities of the job, specific to, and intended for, CH2M Hill Greater Prudhoe Bay projects only and may or may not reflect general duties and responsibilities on other CH2M Hill projects. This description should not be construed as a complete listing of all duties that may be required.Basic Qualifications• Two (2) years experience in mechanical piping, rigging, and general bolt-up required• Valid driver’s license including ability to be insured by CH2M Hill’s auto insurer required. (*All applicants must provide an acceptable five year DMV record at the time of hire).CountryUnited StatesStateAKUS CityPrudhoe BayEmployment TypeFull TimeDegree RequiredHigh School or GEDCertification RequiredN/ATravel PercentageNoneJob CategoryCraft - SkilledRequisition #32666BRCompanyCH2M HILL Energy & ChemicalsWhat you will findJoin CH2M HILL and discover why we have been named by FORTUNE magazine as one of the 100 Best Companies to Work For in 2008, 2006, and 2003. You will find an employee-owned organization built on tradition, driven by values, dedicated to a diverse workforce, and committed to a positive work/life balance – as each day we focus on Developing People through Challenging Projects.

Job Title: Electrician: Journeyman Company: CH2M Hill Location: Prudhoe Bay, AK Description: Electrician- Alaska The challenge? Helping ensure the supply of our world’s oil and gas. At CH2M HILL, we deliver solutions that span the entire breadth of the oil industry. Our Electrician job may provide you with the opportunity to work and live on the North Slope of Alaska on a rotational basis. Each day you will maintain, troubleshoot, repair, install and construction of industrial electrical equipment and systems. You should be a self motivated, detail oriented professional with six years experience as an electrician, three years in industrial electrical work or relevant field, and petrochemical, oilfield or arctic experience.This job posting is based on ANTICIPATED work. Should we be the successful bidder, this job will become immediately available. Please check our company website at www.ch2m.com for the most up-to-date information on the status of this job opening.Our Electricians:• Responsible for maintenance, troubleshooting, repair, installation and construction of industrial electrical equipment and systems found in an industrial or commercial environment through the proper use of standard wire, conduit, fittings and hardware commonly found in industrial plants. • Reads and understands conduit drawings, schematics, drawings, and specifications. • Responsible for use and care of the tools and equipment commonly employed in industrial construction such as hydraulic/electric benders, knockout punch sets, cable puller, meggers, hi-pot equipment, volt meters, multi-testers and ammeters. • Able to set and coordinate overcurrent protective devices, size feeder circuits and work on systems up to and including 13.8 kV.• Must be able to follow all company, client, safety and regulatory requirements, including, but not limited to, policies, procedures, standards and guidelines as they relate to this position and the work duties being performed.• Bend, cut, thread and install conduit. • Install and terminate wiring. • Check out and troubleshoot simple electric circuits and electrical devices and machinery.• Accountable for testing, troubleshooting, setting and calibrating power distribution systems, while working with protective relaying and motor control circuits. Additional Electrician Knowledge, Skills, & Abilities• Possesses current knowledge of Journeyman Electrician, have physical fitness card and an understanding of organizational practices.• Basic understanding of electrical circuits including the operation and function of typical electrical devices and machinery such as solenoids, relays, motors, transformers, switches, motor control centers, generators, batteries and lighting systems. • Possess an excellent knowledge of the National Electric Code. • Has adequate written and oral communications applicable to standards set by organization.Physical Demand/Work Environment:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the essential functions of this job, the employee is required to:• Have the ability to stand, walk on level, uneven and slippery surfaces, sit, squat, kneel, reach through low and high ranges and exhibit normal balance and coordination. These basic physical requirements are essential for safe performance of the job in harsh environments with exposure to very cold temperatures and while wearing arctic gear• Lift 30 lbs from floor to knuckles x 10 self paced but continuous (e.g. Frequent lifting a 30 lb Rigid 700 Conduit Threader)• Lift 40 lbs from floor to knuckles (2 person lift of a 80 lb circuit breaker)• Lift 40 lbs from floor to waist (2 person lift of a 80 lb circuit breaker)• Carry 40 lbs for 50 feet (2 person lift and carry of a 80 lb circuit breaker)• Carry 35 lbs up and down stairs • Climb stairs, 15 steps• Climb vertical ladder, 15 rungs 12” apart • Crawl 10 feet• Have sufficient range of motion of all extremities and spine to work in awkward postures • Verbally communicate with other employees• Have the ability to hear audible safety alarms and warnings.• Have specific vision abilities to adequately perform the above listed tasks in a safe manner.Basic Qualifications• Associate's degree in electrical technology or a four (4) year apprenticeship program may be substituted for four (years) of field experience, provided the industrial electrical experience requirement is met.• Current and valid Alaska State Fitness Certificate as a Journeyman ElectricianCountryUnited StatesUSAStateAKUS CityPrudhoe BayEmployment TypeFull TimeDegree RequiredAssociates or 2 Year DegreeCertification RequiredAlaska Fitness CardJob CategoryCONSTRUCTIONCRAFT (SKILLED)Requisition #32034BRCompanyCH2M HILL Energy & ChemicalsWhat you will findWith a job at CH2M HILL, the greatest challenges provide the biggest rewards. Each day, your drive and ideas will provide solutions that help build a better tomorrow. For decades, CH2M HILL has been a global leader in full service engineering, procurement, construction, management and operations, working on the most challenging and impactful projects around the world. So whether it is the pride that comes with accomplishment, your own personal growth, or making a difference in the world, you will discover true success in a career that brings out the best in you.

Job Title: Maintenance Specialist, Bldg/Facility/Const, Journey II/Lead Company: State of Alaska Location: Juneau, AK Description: Company: State of Alaska Job Title: Maintenance Specialist, Bldg/Facility/Const, Journey II/Lead Jobid: alaska-4d7b3163061cb103892570cb0062ca63/775a730385d7e Register to View 4d5ac Job Location: Juneau, AK, 99824, USA Description: Server time: 02/23/2010 07:45:36 PM Recruitment period ends: 03/05/2010 05:00 PM This positioncloses in 9 days, 21 hours and 14 minutes Recruitment Bulletin Maintenance Specialist, Bldg/Facility/Const, Journey II/Lead Alias:HVAC Specialist Position ID Number:25-2532 Application Period:02/23/2010through03/05/2010 Position open to:All Applicants Department:Administration Division:General Services Location:Juneau Region:Southeast Salary:$24.58Hourly Range:51 Job Status:Full-Time Bargaining Unit:LL Job Description: The Division of General Services is recruiting for an HVAC Specialist to work in the Juneau area. The incumbent will work independently to construct, troubleshoot, repair and maintain State facilities within the guidelines of current State statutes and codes in the most efficient and economical manner possible. Further duties are to protect the State´s interest, liabilities, and obligations for the safety and comfort of the building occupants and the public, and to perform duties that are generated through Maximo preventative maintenance system. Specific duties include but are not limited to: Maintenance, repair, replacement, and adjustments of major HVAC systems to include:•operation of energy management systems (DDC & Pneumatic) •supply and exhaust fans, motors, dampers/operators, air control boxes (VAV), and associated safety and monitoring devices •refrigeration systems •boilers and heating systems •electrical and pneumatic control systems interpret drawings, blueprints, specifications and schematics Perform duties that are generated through Maximo preventative maintenance system. Perform general maintenance tasks as assigned. Plan and fabricate systems and components and communicate plan with Facility Manager II. If you feel that you possess the necessary skills we encourage you to apply! This position is represented by the Labor, Trades and Crafts, Public Employees Local #71/AFL-CIO. Applicants must register with the union. For information on how to apply contact the Facilities Manager II at Register to View The State of Alaska is an Equal Opportunity Employer; women and minorities are encouraged to apply! View Class Specifications for this job: Special Note: Vacancies in this job class are typically filled through hiring hall referral from the Public Employees Local #71; however, postings may appear in Workplace Alaska. Information on union referral procedures is available athttp://www.local71.com/. Minimum Qualifications: Minimum qualifications are determined based on the competencies required of the position. Special Notice for Recruitment: *NOTE* *NOTE* *NOTE* *NOTE* *NOTE* The interview for this position will include a multiple choice test to assess your skill level as it pertains to this position. Applicants needing an accommodation for this testing must contact the person listed below to arrange for any accommodations PRIOR TO the time of interview. This position requires that the incumbent pass a full background check prior to starting employment. COVER LETTER In your cover letter located on the Job Qualification Summary, you must describe your knowledge, skills, and abilities as they pertain to the key responsibilities listed in the job description above. In addition, your application package will be reviewed to determine if you possess the experience and strengths we are seeking in an employee. Your cover letter will be considered a writing sample and will be used to determine which applicants will advance to the interview phase of the recruitment and selection process. FULL-TIME BENEFITS The State of Alaska offers a variety of benefits for eligible employees. Employee benefits are a significant part of the total compensation package. Shown below are just a few benefits received by an eligible State employee. - Health benefit package, which includes employer contribution toward medical/vision/dental. - Employer paid Basic Life insurance with additional coverage available. - Optional long- and short-term disability plans. - Optional dependent and health care flexible spending accounts. - Retirement programs with a wide variety of investment options. - 11 paid holidays. - 37.5 hour work week. http://doa.alaska.gov/drb/ WORK EXPERIENCE If using work experience not already documented in your Applicant Profile, also provide the employer name, your job title, dates of employment and whether full- or part-time. Applicant Profiles and Job Qualification Summaries will be reviewed to determine if the minimum qualifications are clearly met. If they are not, the applicant will not advance to the interview and selection phase of the recruitment. EDUCATION If post-secondary education is required to meet the minimum qualifications, you must fill in the Education and Training section of the Applicant Profile. If you have not obtained a degree, please indicate the number of credit hours earned in the Degrees Obtained field. Copies of transcripts will be required at time of interview. SPECIAL NOTICE This recruitment may be used for more than one (1) vacancy. The applicant pool acquired during this recruitment may be used for future vacancies for up to ninety (90) days after this recruitment closes. Interested applicants are encouraged to apply to each recruitment notice to ensure consideration for all vacancies. If you have successfully submitted your application online, a confirmation page will appear, telling you the date and time your application was submitted, and a confirmation email will be sent to you. If you do not see a confirmation page, or if you do not receive a confirmation email within half hour after submitting your application, call the Division of Personnel to confirm that it was received successfully. Do make sure that you have the correct email address in your Applicant Profile, and that your spam filter will permit email from the ‘state.ak.us’ and ‘alaska.gov’ domains. Additional Required Information: CFC Certification (freon) Class III (or higher) Boiler License Current Alaska Driver´s License Contact Person: Gareth Jones, Facilities Manager II Date required by: E-Mail Address: Register to View Mailing Address: PO Box 110210 Juneau, AK 99811-0210 Fax Number: Register to View Phone Number: None Available

Job Title: Surface Maintenance Mechanic Company: Location: Fort Richardson, AK Description: Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested. May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms. Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyzes as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production. Performs other duties as assigned.

Job Title: Mechanical Maintenance Technician Company: NMS Staffing Location: Valdez, AK Description: Mechanical Maintenance TechnicianThis position is located in Valdez, Alaska and will report to Mechanical Maintenance Supervisors.  The duration of this position will last until mid-November.  Schedule will be weekly, 5 day per week, 12 hours per day.  The candidate will be working along with other technician at the same level.  ESSENTIAL JOB FUNCTIONS:·         Safe and effective maintenance and repair of industrial equipment, systems and utilities as directed. ·         Reading, interpreting and working from vendor and company specifications, technical manuals, diagrams, and schematics.·         Disassembling, inspecting and re-assembling equipment with close attention to proper procedures, fit tolerances and use of specialized tooling required to accomplish these tasks.·         Removing, repairing and installing assorted types of rotating and mechanical equipment used in oil field, pipeline and production procession applications.·         Fabricating parts and tools as required using and operating powered machine shop equipment, hand tools and precise measuring instruments.·         Using safe practices required for removal, repair, replacement and calibration of industrial rotating and mechanical equipment.·         Accurately projecting time requirements, material estimates and equipment/tool needs. ·         Knowledge and use of companies permitting system to safely control work processes. Confined Space Entry training is required for this position.·         Ability to work independently and perform successfully in a team environment with other maintenance personnel and other company departments.·         Good communication skills, both written and oral. Experience with Passport computer software is desirable. ·         Adheres to company policies and regulations, abides by the code of conduct, able to be decisive during a response, and demonstrate professional behavior with highest ethical, moral and legal principles.TYPES OF EQUIPMENTPipefitting, Pumps, motors, valves, compressors and related industrial rotating and mechanical production and processing equipmentEDUCATION/EXPERIENCE REQUIREMENTSHigh level technical proficiency in the field of industrial maintenance with a minimum of five years direct work experience Proficiency with industrial pipe fitting Proficiency with hydrostatic testing High School Diploma/GEDLICENSE’S & CERTIFICATIONS REQUIREDValid State of Alaska Drivers License Clean driving record required  Confined Space Entry Certification will be requiredBACKGROUND CHECKS/PRE-EMPLOYMENT REQUIREMENTSAll applicants being considered for the position will be subject to a criminal background check and drug testing, hair drug testing, fit for duty testing, and respirator testing. WORK ENVIRONMENTWork is performed in a shop environment.  Vehicle travel can occur during severe winter conditions over rough and isolated roads.  Exposure to extreme cold/heat, dusty and or dirty areas, loud noise, orders/vapors/gases, vibration, wet and or humid conditions. PHYSICAL DEMANDSMust be able to lift 10-75 lbs, carry up to 75 lbs, and lift overhead 10-40lbs.  Climb 3-4 stories, catwalks/ladders.  Must be able to differentiate between colors, crouch for calibration or cleanup work.  Requires seeing, all ranges of vision, hearing.  Requires fingering dexterity, handling items in high noise areas and during emergency situations, kneeling, pulling, pushing, reaching, repetitive bending, repetitive twisting, sitting, standing, stooping, talking, tasting/smelling, walking.  Must be able to wear a respirator and pass a respirator fit test.  Candidates need to be physically fit for strenuous activities and working in confined spaces. ALASKA HIRE AND NATIVE PREFERENCE

Job Title: Residential Appliance Repair Technician (Kenai Peninsula, AK) Company: Sears Holdings Location: Soldotna, AK Description: ALREADY EXPERIENCED IN APPLIANCE REPAIR OF AT LEAST 2 YEARS? YOU COULD QUALIFY FOR A $750 BONUS IF HIRED!Seeking experienced field technician with appliance repair background. EPA Universal or Type 1 CFC strongly preferred but not required. Sears technicians diagnose and repair all kitchen & laundry appliances including ovens, refrigerators, dishwashers, garbage disposals, washers, dryers, and other equipment while providing superior service in customer’s homes. Sears technicians are the best equipped in the industry---you will be provided a Sears van, fuel, & laptop computer needed to do the job! In fact, typically our technicians leave in their van from their home to the first call in the morning! We have a computer-generated routing system that enables us to maximize customer satisfaction.Qualified candidates need to live in Peninsula area to be considered.CountryUnited StatesResponsibilities/Skills/Experience RequirementsTo provide the proper customer focus, the In-Home Service Technician must:•Work as a dedicated team member to ensure fast, flexible and expert service to every customer•Demonstrate a sense of urgency to meet customer time commitments •Successfully complete all Technician III training elements within required timeframes•Meet key performance metrics and/or productivity goals as defined by the business•Provide knowledgeable and courteous repair service•Continuously look for methods to improve business performance and enhance the customer experience•Follow the Value Added Services Process (i.e., selling extended warranties, water filters, etc.) by effectively communicating the benefits to the customer•Provide direction to a Technical Helper, as applicable•Ability to receive truck stock at home if the company vehicle is retained at the technician’s place of residence or other designated location.•Mentor other technicians, as applicable•Maintain truck stock inventory within the prescribed company guidelines and standards•Follow the truck maintenance schedule and keep a clean, organized truck•Adhere to all company policies and procedures•Perform miscellaneous duties as assignedAbility to work unsupervised.Requisition ID76329BRPreferred Minimum EducationHigh School / GEDYears Experience2 - 5 Years ExperienceTravel RequirementsOn Occasion (Less than 5%)

Job Title: CT - ELECTRICIAN Company: UNIVERSITY OF ALASKA SOUTHEAST Location: Juneau, AK Description: NOW HIRING IN JUNEAUCT-ELECTRICIAN UAS Facilities Services Covered by bargaining unit. Must have: ADOL Electrician Certificate of Fitness or combination of education/apprenticeship sufficient to qualify for Certificate of Fitness: valid Alaska driver's license: knowledge of codes, methods, materials, tools and practices in all aspects of commercial type building electrical systems. Starting salary $24.48 per hr DOE. Five years of trade experience. Application review begins 3/29/10 until filled. Announcement and application are available at www.uakjobs.com reference posting number 0059425 or call Personnel Services, 796-6263. UAS is an AA/EO Employer and Educational Institution.