Maintenance Jobs in Jonesboro, Arkansas

Job Title: Electricians Needed Company: Location: Jonesboro, AR Description: Upcoming Opportunities in the Electrical Industry. Looking for electricians with commercial and industrial experience. Conduit bending, circuit planning, the ability to read and understand blueprints are some of the skills we are looking for. Must have current Drivers License. Drug Screen Required. For more information call: Jeremy Edgar Register to View Register to View

Job Title: Residential Appliance/Refrigeration Repair Technician Company: Sears, Roebuck & Co. Location: Jonesboro, AR Description: Residential Appliance/Refrigeration Repair Technician Sears, Roebuck and Co., a member of the Sears Holdings Corporation (NASDAQ: SHLD) family of companies, is a leading full-line retailer providing merchandise, related services and quality brands such as Kenmore, Craftsman, Diehard and Lands' End. We offer a wide range of home merchandise, appliances, electronics, apparel and automotive products and services through more than 2,400 Sears-branded and affiliated stores in all 50 states, Puerto Rico and Canada. We also offer a variety of merchandise and services through specialty catalogs and sears.com. Our web-to-store and store-to-web capabilities add even more convenience to our customers. We are also the nation's largest provider of home services, with more than 13 million service calls made annually. This position is responsible for the repair of products in the customer’s home. Products repaired include Air Conditioners and AC Systems, Dehumidifiers, Heat Pumps, Furnaces, HVAC, Oil/Boilers, Refrigerators and Freezers (sealed systems), Washers, Dryers, Ranges, Ovens, Microwaves and a variety of other home appliances. This position provides timely and quality repairs of customers’ products while maintaining high customer service. Additionally, technicians promote and sell additional products and services that directly impact the profitability of the company. We provide a service van, specialized tools, uniforms, laptop computer, cell telephone, and periodic training. Minimum of two years direct appliance and HVAC repair experience and EPA certification required. Please RUSH your resume TODAY to Register to View or fax to Register to View . Qualifications: To provide the proper customer focus, the In-Home Service Technician must: •Work as a dedicated team member to ensure fast, flexible and expert service to every customer •Demonstrate a sense of urgency to meet customer time commitments •Successfully complete all Technician II training elements within required timeframes •Meet key performance metrics and/or productivity goals as defined by the business •Provide knowledgeable and courteous repair service •Continuously look for methods to improve business performance and enhance the customer experience •Follow the Value Added Services Process (i.e., selling extended warranties, water filters, etc.) by effectively communicating the benefits to the customer •Provide direction to a Technical Helper, as applicable •Ability to receive truck stock at home if the company vehicle is retained at the technician’s place of residence or other designated location. •Mentor other technicians, as applicable •Maintain truck stock inventory within the prescribed company guidelines and standards •Follow the truck maintenance schedule and keep a clean, organized truck •Adhere to all company policies and procedures •Perform miscellaneous duties as assigned A comprehensive and competitive benefit program is designed to meet the needs of our associates and their families. Benefits eligibility depends on employment classification, location, and other variables. Benefits offered include: Medical and Dental Plans Health Care and Dependent Daycare Flexible Spending Accounts Short and Long-Term Disability Company Paid and Optional Life Insurance Business Travel Insurance Merchandise Discount Adoption Assistance Kmart Advantage Rx ConSern Loans for Education Worklife Solutions Voluntary Benefits Commuter Benefits Sears Holdings Corporation Associate Stock Purchase Plan 401(k) Savings Plan Vacation Time with Personal Days National Holidays Click “Apply Now” and start your application process today! And don’t forget to tell them you came from SnagAJob.com!  Sears is an Equal Opportunity/Affirmative Action Employer.

Job Title: Plastic Process & Maintenance Technician Arkansas Company: MRINetwork Location: Jonesboro, AR Description: For a complete listing of our open jobs logon at www.plasticjobsource.com  Currently staffing for the following positions in Near Little Rock, AR & Jonesboro, AR Plastic Injection Molding Process Engineer Plastic Injection Molding Process Technician Plastic Injection Molding Supervisor Plastic Injection Molding Maintenance Techncian This position is with a Growing, Stable, Plastic Injection Molding Manufacturing company These positions require hands-on plastic injection molding experience Some relocation assistance is available for this position Contact: Company: MRINetwork Email: Apply by Email Job Reference Code: Arkansas Candidate Send this job to a friend

Job Title: Maint. Supervisor Company: (Publication) Classified Ad Company Location: Jonesboro, AR Description: MAINTENANCE SUPERVISOR: Looking for an experienced maintenance supervisor able to work on all aspects of healthcare building with electrical, plumbing, heating and air, and life safety code. Email resume to Register to View

Job Title: Maintenance Mechanic Company: Kinder Morgan Location: Blytheville, AR Description: Primary purpose:  Install, maintain, diagnose, and repair primarily road and off-road equipment related to the unloading, loading, transfer, and storage of bulk materials.Essential duties and responsibilities:•  Dismantle and repair heavy equipment including diesel and gas engines, electric motors and generators, hydraulic and pneumatic attachments, cable handling devices, control systems, fuel and brake systems, etc…•  Move machinery and equipment as needed to check out and repair.•  Repair and lubricate machines, equipment, and heavy equipment.•  Diagnose problems and make repairs to heavy equipment, cranes, loaders, dozers, etc…•  Perform preventive maintenance on mechanical engines, vehicles, and equipment used in bulk handling operations.•  Lubricate moving parts and operate repaired equipment to verify conformance to specifications.•  Examine protective guards, loose bolts, and safety devices on equipment and make adjustments.•  Operate a variety of tools/equipment such as cutting torch, welder, forklift, hand tools, power tolls (impact wrench, drills, etc…) and electric meters.•  Work from blueprints, sketches, or verbal instructions•  Responsible for general upkeep and maintenance of all facilities and equipment as needed.•  Respond to emergency call-outs to perform maintenance duties•  Identify, report, and correct safety and environmental concerns.•  Complete appropriate documentation and paperwork.•  Perform all work in compliance with company standards, procedures, and regulatory requirements.•  Attend daily/weekly safety meetings.•  Administer general preventative maintenance activities, repairs, and housekeeping tasks. •  Perform any other terminal functions as trained, requested, and instructed by supervision. Position Requirements Minimum requirements:Education:  High School Graduate or equivalent.Experience / specific knowledge:•  Knowledge and experience in safe handling practices of flammable gases, liquids, and high pressure systems.Certifications, licenses, registrations:  Valid driver’s license. Competencies, skills, and abilities:•  Ability to accept supervision/direction and work effectively and cooperatively with other people. •  Ability to carry and communicate over a company provided mobile radio.•  Must possess basic math skills in regards to addition, subtraction, multiplication, and division. •  Must possess safety training and security certification as required by customers to work in their facilities and as required by all Kinder Morgan locations.•  Ability to deal with evolving operating conditions with few concrete variables in standardized situations.•  Ability to focus attention and follow work rules.•  Demonstrate aptitude to execute and maintain necessary records.•  Successful completion of background check and post-offer and random drug screens. Physical demands:•  While performing duties of this job, the employee is regularly required to sit and stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces, and frequently lifting and/or moving up to 70 pounds. Employee must be able to work at heights up to 80 feet.  Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. • Must meet medical criteria for use of respiratory protective equipment, if required.Working conditions: •  Must be willing to work all shifts, overtime, weekends, and holidays as needed and required.•  Must be available to respond to call-out as assigned.•  Perform work in dusty environment and all types of temperature/weather conditions.•  While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes or airborne particles, and vibration. The employee is frequently exposed to high, precarious places and risk of electrical shock. The noise level in the environment is usually loud.•  Must be available for assignments at multiple berths within a 10 mile radius.Supervisory responsibility:  NonePreferred education, experience, certifications, competencies, skills, and abilities above the minimum requirements; not required but advantageous in this position:•  Prior experience repairing construction or agricultural equipment• Diploma or Certificate from accredited trade/vocational school for auto/diesel/truck mechanic training.Other requirements:  Must possess basic mechanics hand tools, tape measure, adjustable wrenches, hammer, pliers, screwdrivers, etc…

Job Title: Industrial Maintenance Mechanic Company: Parker Hannifin Location: Kennett, MO Description: This position is responsible for the general maintenance, installation and other mechanical duties in an industrial environment to minimize downtime and loss of production. Candidate must be familiar with general maintenance work and machine shop work.  Machine shop work will include fabrication from drawings or original part.  Repair, rebuild or maintain equipment using lathe, drill press, milling machine, surface grinder, grinders, welder and torch and precision measuring equipment.

Job Title: Maintenance Mechanic Company: Kinder Morgan Location: Armorel, AR Description: Primary purpose:  Install, maintain, diagnose, and repair primarily road and off-road equipment related to the unloading, loading, transfer, and storage of bulk materials.Essential duties and responsibilities:•  Dismantle and repair heavy equipment including diesel and gas engines, electric motors and generators, hydraulic and pneumatic attachments, cable handling devices, control systems, fuel and brake systems, etc…•  Move machinery and equipment as needed to check out and repair.•  Repair and lubricate machines, equipment, and heavy equipment.•  Diagnose problems and make repairs to heavy equipment, cranes, loaders, dozers, etc…•  Perform preventive maintenance on mechanical engines, vehicles, and equipment used in bulk handling operations.•  Lubricate moving parts and operate repaired equipment to verify conformance to specifications.•  Examine protective guards, loose bolts, and safety devices on equipment and make adjustments.•  Operate a variety of tools/equipment such as cutting torch, welder, forklift, hand tools, power tolls (impact wrench, drills, etc…) and electric meters.•  Work from blueprints, sketches, or verbal instructions•  Responsible for general upkeep and maintenance of all facilities and equipment as needed.•  Respond to emergency call-outs to perform maintenance duties•  Identify, report, and correct safety and environmental concerns.•  Complete appropriate documentation and paperwork.•  Perform all work in compliance with company standards, procedures, and regulatory requirements.•  Attend daily/weekly safety meetings.•  Administer general preventative maintenance activities, repairs, and housekeeping tasks. •  Perform any other terminal functions as trained, requested, and instructed by supervision. Position Requirements Minimum requirements:Education:  High School Graduate or equivalent.Experience / specific knowledge:  Knowledge and experience in safe handling practices of flammable gases, liquids, and high pressure systems.Certifications, licenses, registrations:  Valid driver’s license. Competencies, skills, and abilities:•  Ability to accept supervision/direction and work effectively and cooperatively with other people. •  Ability to carry and communicate over a company provided mobile radio.•  Must possess basic math skills in regards to addition, subtraction, multiplication, and division. •  Must possess safety training and security certification as required by customers to work in their facilities and as required by all Kinder Morgan locations.•  Ability to deal with evolving operating conditions with few concrete variables in standardized situations.•  Ability to focus attention and follow work rules.•  Demonstrate aptitude to execute and maintain necessary records.•  Successful completion of background check and post-offer and random drug screens. Physical demands:•  While performing duties of this job, the employee is regularly required to sit and stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces, and frequently lifting and/or moving up to 70 pounds. Employee must be able to work at heights up to 80 feet.  Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. •  Must meet medical criteria for use of respiratory protective equipment, if required.Working conditions: •  Must be willing to work all shifts, overtime, weekends, and holidays as needed and required.•  Must be available to respond to call-out as assigned.•  Perform work in dusty environment and all types of temperature/weather conditions.•  While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes or airborne particles, and vibration. The employee is frequently exposed to high, precarious places and risk of electrical shock. The noise level in the environment is usually loud.•  Must be available for assignments at multiple berths within a 10 mile radius.Supervisory responsibility:  NonePreferred education, experience, certifications, competencies, skills, and abilities Above the minimum requirements; not required but advantageous in this position:•  Prior experience repairing construction or agricultural equipment•  Diploma or Certificate from accredited trade/vocational school for auto/diesel/truck mechanic training.Other responsibilities:  Must possess basic mechanics hand tools, tape measure, adjustable wrenches, hammer, pliers, screwdrivers, etc…

Job Title: Welder - Terminals Company: Kinder Morgan Location: Armorel, AR Description: Primary purpose: Install, maintain, and repair by layout, fitting and welding of mobile equipment and terminal structures related to the unloading, loading, transfer and storage of bulk materials. Essential duties and responsibilities:•  Layout, cut, fit, and prepare material for welding.•  Welding as directed toward the successful installation, maintenance, troubleshooting, and repair of rolling equipment, conveyance systems, barges, and other related equipment.•  Work from blueprints, sketches, or verbal instructions•  Responsible for general upkeep and maintenance of all facilities and equipment as needed.•  Identify, report, and correct safety and environmental concerns.•  Complete appropriate documentation and paperwork.•  Perform all work in compliance with company standards, procedures, and regulatory requirements.•  Attend daily/weekly safety meetings.•  Administer general preventative maintenance activities, repairs, and housekeeping tasks. •  Perform other duties as necessary, directed and instructed by supervision. Position Requirements Minimum requirements:Education:  High School Graduate or equivalent.Experience / specific knowledge:•  Required to demonstrate satisfactory welding techniques.•  Knowledge of basic properties of metals.•  Knowledge and experience in safe handling practices of flammable gases, liquids, and high pressure systems.Certifications, licenses, registrations:  None for entry level. Competencies, skills, and abilities:•  Ability to accept supervision/direction and work effectively and cooperatively with other people. •  Must possess basic math skills in regards to addition, subtraction, multiplication, and division. •  Ability to deal with evolving operating conditions with few concrete variables in standardized situations.•  Ability to focus attention and follow work rules.•  Demonstrate aptitude to execute and maintain necessary records.•  Successful completion of background check and post-offer and random drug screens. Physical demands:•  While performing duties of this job, the employee is regularly required to sit and stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces, and frequently lifting and/or moving up to 50 pounds. Employee must be able to work at heights up to 80 feet.  Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. •  Must meet medical criteria for use of respiratory protective equipment.Working conditions: •  Must be willing to work all shifts, overtime, weekends, and holidays as needed and required.•  Must be available to respond to call-out as assigned.•  Perform work in dusty environment and all types of temperature/weather conditions.•  While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, fumes or airborne particles, and vibration. The employee is frequently exposed to high, precarious places and risk of electrical shock. The noise level in the environment is usually loud.•  Must be available for assignments at multiple berths within a 10 mile radius.Supervisory responsibility:  NonePreferred education, experience, certifications, competencies, skills, and abilities above the minimum requirements; not required but advantageous in this position:  Previous welding experience.  Other requirements:  Must possess basic hand and welding tools, square, 25 foot tape measure, tri-square, welding helmet, adjustable wrenches, hammer, pliers,  etc.

Job Title: Small Engine Repair Technician Company: Sears, Roebuck & Co. Location: Batesville, AR Description: Small Engine Repair Technician Sears, Roebuck and Co., a member of the Sears Holdings Corporation (NASDAQ: SHLD) family of companies, is a leading full-line retailer providing merchandise, related services and quality brands such as Kenmore, Craftsman, Diehard and Lands' End. We offer a wide range of home merchandise, appliances, electronics, apparel and automotive products and services through more than 2,400 Sears-branded and affiliated stores in all 50 states, Puerto Rico and Canada. We also offer a variety of merchandise and services through specialty catalogs and sears.com. Our web-to-store and store-to-web capabilities add even more convenience to our customers. We are also the nation's largest provider of home services, with more than 13 million service calls made annually. This position is responsible for the repair of products in the customer’s home. Products repaired include Lawn and Garden equipment, Riding Mowers, Push Mowers, Tractors, Tractor attachments, Tillers, Snow Throwers, Log Splitters, Chippers, Shredders, VACs, Grills, Power Tools, Garage Door Openers, Recreation Equipment, and a variety of other home appliances. This position provides timely and quality repairs of customers’ products while maintaining high customer service. Additionally, technicians promote and sell additional products and services that directly impact the profitability of the company. We provide a service van, specialized tools, uniforms, laptop computer, cell telephone, and periodic training. Minimum two years direct work experience required. Qualifications: To provide the proper customer focus, the In-Home Service Technician must: •Work as a dedicated team member to ensure fast, flexible and expert service to every customer •Demonstrate a sense of urgency to meet customer time commitments •Successfully complete all Technician I training elements within required timeframes •Meet key performance metrics and/or productivity goals as defined by the business •Provide knowledgeable and courteous repair service •Continuously look for methods to improve business performance and enhance the customer experience •Follow the Value Added Services Process (i.e., selling extended warranties, water filters, etc.) by effectively communicating the benefits to the customer •Provide direction to a Technical Helper, as applicable •Ability to receive truck stock at home if the company vehicle is retained at the technician’s place of residence or other designated location. •Mentor other technicians, as applicable •Maintain truck stock inventory within the prescribed company guidelines and standards •Follow the truck maintenance schedule and keep a clean, organized truck •Adhere to all company policies and procedures •Perform miscellaneous duties as assigned A comprehensive and competitive benefit program is designed to meet the needs of our associates and their families. Benefits eligibility depends on employment classification, location, and other variables. Benefits offered include: Medical and Dental Plans Health Care and Dependent Daycare Flexible Spending Accounts Short and Long-Term Disability Company Paid and Optional Life Insurance Business Travel Insurance Merchandise Discount Adoption Assistance Kmart Advantage Rx ConSern Loans for Education Worklife Solutions Voluntary Benefits Commuter Benefits Sears Holdings Corporation Associate Stock Purchase Plan 401(k) Savings Plan Vacation Time with Personal Days National Holidays An Equal Employment Opportunity Employer. Click “Apply Now” and start your application process today! And don’t forget to tell them you came from SnagAJob.com!

Job Title: O%26M Facilities Maintenance Technician - (Ammonia) Covington, TN Company: Johnson Control, Inc. Location: Covington, TN Description: Operating at a journeyman level, performs a variety of complex services or repairs in a specialized skill area such as mechanical, electrical / electronic, hydraulics / pneumatics, millwright, plumbing, carpentry, or machine servicing, etc.Includes direct experience with Ammonia Chillers as an operator and mechanicPRINCIPLE DUTIES:Performs a variety of service work in one or more specialized building systems such as mechanical, electrical / electronic, hydraulics, carpentry, or machine servicing, etc.Provides direction and training to less experienced OM Specialists.Plans, selects, and lays out required materials for service and repair work.Works from drawings, schematics, blueprints, job layouts or verbal instructions and operates a variety of tools and machines incidental to operations.Requisitions new supplies and equipment.Performs all work in accordance with established safety procedures.Complies with all company policies and procedures and adhere to company standards.Perform other duties as required.