Electronic Integrated Systems Mechanic
- Headquarters, Air Force Reserve Command
- Dobbins AFB, Georgia
- Part Time
This is an Air Reserve Technician (ART) position. ARTs are part of the regular career civil service and enjoy all the benefits granted to Federal employees in the competitive civil service.
For more information click here and speak with an Air Force Reserve Recruiter.
Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, WG-2600 - Electronic Equipment Installation and Maintenance Family
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600 - Electronic Equipment Installation and Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying.
The screen out element for this position is the ability to do the work of an Electronic Integrated Systems Mechanic without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of electronic theories and practices of one or more complex integrated systems.
2. Skill in the use of standard hand and power tools of the electronics trade. Skill in the set up and operation of computer controlled automated test equipment (ATE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete integrated systems to recognize the function and interconnections of components, assemblies, subassemblies, and connecting cable/fiber-optics harness; and in troubleshooting, installing, repairing, and maintaining electronic integrated systems where circuit theory must be used. Skill in calibrating and adjusting components..
3. Comprehensive knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices and ability to analyze, modify, and repair complex electrical or environmental systems and components on assigned aircraft.
4. Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade. Ability to use a variety of electronic, electrical, or electromechanical test and measurement equipment. Ability to interpret and comply with regulations and instructions on security, safety, documentation, and other publications governing the performance of duties.
5. Comprehensive knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices. Knowledge of USAF Technical Order Program and its procedures.
6: Basic computer skills are required. Individual must be able to access and use computer-based maintenance documentation and supply systems and be capable of assimilating training on new systems as they are developed and implemented.
OTHER SIGNIFICANT FACTS:
1: This is an Air Reserve Technician (ART) position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow incumbent to fully participate in unit training assemblies (UTA). The incumbent's regular assignments are ART duties; however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities.
2: May be required to fly in military or contract aircraft for TDY maintenance or training, in accordance with the JTRs.
3: May be required to support other units in performing maintenance.
FUNCTIONAL REQUIREMENTS: Heavy lifting (up to 40 lbs.). Two-man lift for items exceeding 40 lbs. Heavy carrying (40 lbs.). Reaching above the shoulder. Use of fingers. Both hands required. Hours of walking are approximately 4 hours/day. Hours of standing are approximately 4 hours/day. Hours of repeated bending are approximately 4 hours/week. Climbing, use of legs and arms. Both legs required. Operation of special purpose and/or motor vehicles. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Depth perception. Ability to distinguish basic colors. Ability to distinguish shades of color. Hearing (with or without aid permitted).
ENVIRONMENTAL FACTORS: Work is performed in hangar areas, outdoors, in/on aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to bodily fluids, dirt, grease, and aircraft fluids (oil, hydraulic, fuel, sealants, solvents, and hazardous fluids and gases). Potentially exposed to Hydrazine, Halon, and/or composites, electrical shocks, RF radiation, and Low Observable (LO). Subject to eye damage due to exposure to LASERs. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone.
PART-TIME OR UNPAID EXPERIENCE : Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE : Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). You will receive credit for all qualifying experience, including volunteer experience.
This is an Air Reserve Technician (ART) position. ARTs are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members; are subject to immediate call to active duty in mobilization to meet a national emergency. For additional information regarding ART positions and/or military qualifications, please call .... Retired military are usually ineligible for membership in the AF Reserve. Retired military that have active AF Reserve assignments may apply provided they show assignment (position) on the application. A military service member's statement of service/certification will be accepted IF a terminal leave form or DD214 cannot be provided. The statement/certification should indicate member's separation from active duty is within 120 days of the closing date of this announcement. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin, your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Your preference and/or appointment eligibility will be verified prior to appointment. Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave.
Individuals selected for ART positions must meet both civilian qualifications and uniformed military requirements. In addition to meeting civilian qualifications, applicants must obtain military membership in the Air Force Reserve, wear the uniform, maintain job-specific military specialty requirements, and meet other military qualifications such as age, height, weight, and physical fitness standards. For more information click here and speak with an Air Force Reserve Recruiter. IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.
FOREIGN EDUCATION : Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
For more information click here and speak with an Air Force Reserve Recruiter.
Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, WG-2600 - Electronic Equipment Installation and Maintenance Family
QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-2600 - Electronic Equipment Installation and Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying.
The screen out element for this position is the ability to do the work of an Electronic Integrated Systems Mechanic without more than normal supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of electronic theories and practices of one or more complex integrated systems.
2. Skill in the use of standard hand and power tools of the electronics trade. Skill in the set up and operation of computer controlled automated test equipment (ATE) and test stands, oscilloscopes (dual trace, storage, digitized), spectrum, network and distortion analyzers, frequency counters, and signal generators; in interpreting complex drawings, specifications, and schematics of complete integrated systems to recognize the function and interconnections of components, assemblies, subassemblies, and connecting cable/fiber-optics harness; and in troubleshooting, installing, repairing, and maintaining electronic integrated systems where circuit theory must be used. Skill in calibrating and adjusting components..
3. Comprehensive knowledge of testing and troubleshooting techniques and procedures utilizing a variety of test devices and ability to analyze, modify, and repair complex electrical or environmental systems and components on assigned aircraft.
4. Ability to read and interpret a variety of technical data such as schematic diagrams, blueprints and technical orders relating to the electronics trade. Ability to use a variety of electronic, electrical, or electromechanical test and measurement equipment. Ability to interpret and comply with regulations and instructions on security, safety, documentation, and other publications governing the performance of duties.
5. Comprehensive knowledge of operation, capabilities and limitations of complex electronic systems complicated by a variety of multi component assemblies and devices. Knowledge of USAF Technical Order Program and its procedures.
6: Basic computer skills are required. Individual must be able to access and use computer-based maintenance documentation and supply systems and be capable of assimilating training on new systems as they are developed and implemented.
OTHER SIGNIFICANT FACTS:
1: This is an Air Reserve Technician (ART) position. The incumbent is required to meet and maintain Air Force Reserve requirements. Work schedule will be aligned to allow incumbent to fully participate in unit training assemblies (UTA). The incumbent's regular assignments are ART duties; however, the incumbent may be assigned some non-ART duties, generally not to exceed 30 percent of total responsibilities.
2: May be required to fly in military or contract aircraft for TDY maintenance or training, in accordance with the JTRs.
3: May be required to support other units in performing maintenance.
FUNCTIONAL REQUIREMENTS: Heavy lifting (up to 40 lbs.). Two-man lift for items exceeding 40 lbs. Heavy carrying (40 lbs.). Reaching above the shoulder. Use of fingers. Both hands required. Hours of walking are approximately 4 hours/day. Hours of standing are approximately 4 hours/day. Hours of repeated bending are approximately 4 hours/week. Climbing, use of legs and arms. Both legs required. Operation of special purpose and/or motor vehicles. Near vision correctable at 13 inches to 16 inches to Jaeger 1 to 4. Far vision correctable in one eye to 20/20 and 20/40 in the other. Depth perception. Ability to distinguish basic colors. Ability to distinguish shades of color. Hearing (with or without aid permitted).
ENVIRONMENTAL FACTORS: Work is performed in hangar areas, outdoors, in/on aircraft, and sometimes in hazardous noise areas. Exposed to extremes in heat, cold, humidity and inclement weather. Must work in confined areas and in awkward positions. Exposed to bodily fluids, dirt, grease, and aircraft fluids (oil, hydraulic, fuel, sealants, solvents, and hazardous fluids and gases). Potentially exposed to Hydrazine, Halon, and/or composites, electrical shocks, RF radiation, and Low Observable (LO). Subject to eye damage due to exposure to LASERs. Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces. Slippery or uneven walking surfaces. Working around machinery with moving parts. Working around moving objects or vehicles. May be exposed to intake suction and hot exhaust blast. Working closely with others. Working alone.
PART-TIME OR UNPAID EXPERIENCE : Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.
VOLUNTEER WORK EXPERIENCE : Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). You will receive credit for all qualifying experience, including volunteer experience.
This is an Air Reserve Technician (ART) position. ARTs are eligible for 15 days active duty tour each year for which military leave is granted with full civilian pay. Air Reserve units and members; are subject to immediate call to active duty in mobilization to meet a national emergency. For additional information regarding ART positions and/or military qualifications, please call .... Retired military are usually ineligible for membership in the AF Reserve. Retired military that have active AF Reserve assignments may apply provided they show assignment (position) on the application. A military service member's statement of service/certification will be accepted IF a terminal leave form or DD214 cannot be provided. The statement/certification should indicate member's separation from active duty is within 120 days of the closing date of this announcement. It must be signed by, or by direction of, the adjutant, personnel officer, or commander of your unit or higher headquarters and must indicate when your terminal leave will begin, your rank, dates of active duty service, the type of discharge and character of service (i.e. honorable). Your preference and/or appointment eligibility will be verified prior to appointment. Military members may be appointed before the effective date of their military retirement/separation if member is on terminal leave.
Individuals selected for ART positions must meet both civilian qualifications and uniformed military requirements. In addition to meeting civilian qualifications, applicants must obtain military membership in the Air Force Reserve, wear the uniform, maintain job-specific military specialty requirements, and meet other military qualifications such as age, height, weight, and physical fitness standards. For more information click here and speak with an Air Force Reserve Recruiter. IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.
FOREIGN EDUCATION : Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.
Job ID: 488349697
Originally Posted on: 8/6/2025
Want to find more Maintenance And Installation opportunities?
Check out the 89,743 verified Maintenance And Installation jobs on iHireMaintenanceAndInstallation
Similar Jobs